Knowledge Base

Technical and product information relating to our catalogue of MEAN WELL, VOX, EUCHIPS, ELED and Ecopac products.

If you can't find the answer you're looking for here, our expert team are on hand to help. Call us on 01844 20 44 20

Safety Standard

What is RoHs?

24/09/20
Technical Question

What is the input voltage of the ELG series?

21/09/20
Technical Question

Would it be possible to reduce the noise of a fan?

21/09/20
Technical Question

How to select the correct circuit breaker or fuse for MEAN WELL SPS?

21/09/20
Technical Question

If we need a 600W output, can we use two units of S-320 connected in parallel?

21/09/20
Technical Question

The output ground (GND) and frame ground (FG) is the same point in my system, can MEAN WELL's power supplies be used in such system?

21/09/20
Technical Question

If we need a 24V output power supply, can we use two 12V power supplies connecting in series instead of one 24V power supply?

21/09/20
Technical Question

During the operation of your power supply, there is some leakage current on the case. Is this normal? Will this leakage current hurt the human body?

21/09/20
Technical Question

What is the fan control mechanism for SPS with cooling fan?

21/09/20
Technical Question

I have an TN-1500 inverter. Why is the LED indication of AC IN not lit after mains input has been applied?

21/09/20
Technical Question

How do we choose a power supply to charge a battery?

21/09/20
Technical Question

What is the difference between -V and COM which are marked on the output side?

21/09/20
Technical Question

What is "Inrush Current"? and What will we notice?

21/09/20
Technical Question

What is PFC?

21/09/20
Technical Question

In MEAN WELL's catalog, we see AC and DC at input, what does this mean?

21/09/20
Technical Question

Why is the fan is not running after turning on certain models?

21/09/20
Technical Question

Why did the power supply shut down during operation and after turning it off, I can't restart the power supply again?

21/09/20
Technical Question

When testing a dual output power supply, the +5V channel is correct, but the +12V channel is over the specification. What is going on?

21/09/20
Technical Question

Can MEAN WELL's power supply be used in the range of 45Hz ~ 440Hz? If YES, what will happen?

21/09/20
Technical Question

How do Mean Well test for Electro Magnetic Interference (EMI) ?

21/09/20
Safety Standard

Safety Standards

09/09/20
Technical Question

How to select a LED driver to DIM LED Strip?

06/06/19
Technical Question

Can MEAN WELL chargers be used in conjunction with a Lithium battery or other type of battery?

06/06/19

Sales & Support

Get in touch