Introduction

MEAN WELL’s new generation of slim 3-phase input DIN rail power supplies have been widely adopted by high power 3-phase systems since the release of the TDR-480/960(480W/960W). In order to fulfill lower power application requirements, MEAN WELL is proud to announce the 240W, TDR-240 series.

TDR-240’s key features include: 340~550VAC 3-phase input (2-phase input operational), fanless design cooled by free air convection, full load operation up to +60°C, 63mm narrow width, and a size that is 43% smaller than the previous generation DRT-240 series, which can solve spacing issues in limited space. In addition, the product series complies with the industrial immunity level based on the EN61000-6-2 (EN50082-2) standards and passes UL61010/TUV EN61558-2-16/EAC/CE international safety approvals. Suitable applications include industrial control systems, semiconductor fabrication equipment, factory automation, industrial electrical equipment, as well as environments that require low noise level and fanless power supplies.

Features

  • 3-phase 340~550VAC input (2-phase operation possible w/ de-rating)
  • 63mm narrow width
  • Up to 92% high efficiency
  • Fanless design, cooling by free air convection
  • -30~+70℃ wide temperature range (full load operation at +60℃)
  • Built-in DC OK relay contact signal
  • Protections: short circuit, overload protection, overvoltage protection, over-temperature protection
  • Compliance to EN61000-6-2(EN50082-2) industrial immunity level
  • UL61010, TUV EN61558-2-16, EAC, CE safety approved
  • Suitable for mounting on DIN rails: TS-35/7.5 or TS-35/15
  • Dimensions (W x H x D): 63 x 125.2 x 113.5mm
  • 3 years warranty

Applications





Order Products

TDR-240 24V - click here

TDR-240 48V - click here