Mean Well SDR-960 Series DIN Rail Power Supplies

Mean Well SDR-960 Series DIN Rail Power Supplies

Following the successful launch of SDR-120 (120W), SDR-240 (240W), and SDR-480 (480W) series power supplies, MEAN WELL further introduced the 960W high performance AC/DC DIN rail SDR-960 power supply series, to meet the demands of high wattage, slim width DIN rail power units. Featuring a width design of 110mm, 94% of high efficiency, and free air convection cooling, these power supplies not only use less precious space on the rail, but also are highly reliable DIN rail power supplies that meet the demands of modern energy-saving design.

Built-in active PFC function and featuring with 180~264VAC input range, the SDR-960 series is equipped with state of the art, high efficiency circuit design. 94% efficient and can be full load operated at 960W by free air convection cooling at +50°C ambient temperature (or up to +70℃ by suitable power derating). Other standard functions include DC OK relay contact alarm signal output, parallel function (up to 4 units), front panel DC voltage adjustment (100~115%), front panel LED indicator, as well as short-circuit protection, overload (constant current mode, shut down after 3 seconds), over voltage, and over temperature protection. In addition, they comply with UL508, TUV EN60950-1, CB (IEC60950-1), and CE certificates and also meet the EMC requirements of heavy industrial immunity level (EN61000-6-2).

Applications include industrial control system, semi-conductor fabrication equipment, factory automation, electro-mechanical applications, and any installations with fan-less or low noise requirements.

For information on stock and pricing please call 01844 204420 or email

Meanwell SDR-960 Series Features

  • Single phase 180~264VAC input range
  • 110mm slim design
  • 94% high efficiency
  • 130% peak load capability for 3 seconds
  • Built-in active PFC function
  • Built-in parallel function, current sharing up to 4 units
  • Protection: Short circuit / Overload(C.C. mode, shut down after 3 seconds) / Over voltage / Over temperature
  • Fan-less design, cooling by free air convection
  • DC OK relay contact
  • Front panel DC voltage adjustment
  • Installed on DIN rail TS-35 / 7.5 or 15
  • LED indicator for power on
  • Certificates: UL / CUL / TUV / CB / CE
  • Dimension(WxHxD): 110x 125.2x 150mm
  • 3 years warranty


Leave a Reply

Sorry, you must be logged in to post a comment.