DALI LED Driver from Mean Well - Ecopac Now Stock LCM-60DA

DALI LED Driver from Mean Well - Ecopac Now Stock LCM-60DA

Now available from Ecopac Power the Mean Well LCM-60DA is a 60 watt Led power supply with built-in DALI (Digital Addressable Lighting Interface) and a push dimming function.

With built-in active PFC function and input range of 180 - 295VAC the LCM-60DA meets the DALI standards IEC62386-101, 102 and 207 and using the DALI interface allows up to 10 units to be synchronised with a maximum cable length between each unit of 20 meters.

The Mean Well LCM-60DA has a selectable output for different current options and an auxiliary 12v output for powering a fan. The DALI protocol for this 60 watt power supply includes 16 groups and 64 addresses.

Other dimming options are by way of Push Dim with up to 10 drivers and the maximum length of cable from the push button to the last driver is 20 meters. When the LED light is lower than 10% the LCM-60DA will always dim up or when the LED light output is higher than 90% the unit will always dim down.

Designed with up to 90% of high efficiency the LCM-60DA can operate from -30°C to +60°C ambient temperature with only free air convection. Other standard functions include Class II without FG with protection for short circuit, over voltage, overload and over temperature.

The Mean Well LCM-60DA complies with UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 and meets 2KV surge immunity EN61547. This high efficiency DALI power supply is supplied with a 3 years warranty and designed for use with energy efficient and flexible LED lighting systems.

For further information please call 01844 204420 or email sales@ecopacpower.com

Mean Well LCM-60DA Key Features

  • Output current selectable by DIP switch
  • 180~295VAC input
  • Built-in active PFC function
  • Protections: Short circuit/Over voltage/Over temperature
  • Cooling by free air convection
  • Fully isolated plastic case with strain relief design
  • Class II Power unit
  • Built-in DALI interface or push dimming function
  • Built-in 12V/50mA auxiliary output
  • IP20 design
  • Temperature compensation function by external NTC
  • No load power consumption <1.2W@AC always on
  • Power supplies synchonization function up to 10 units


Leave a Reply

Sorry, you must be logged in to post a comment.